Frontal impact compliance status

Honda - revision 8

Last updated 26 May 2003 - revisions are in bold.

You must read Infosheet 1.67 in conjuction with this information.

Warning: The table below lists the frontal impact compliance status of Class MA Honda vehicles that were manufactured for the Japanese domestic market. This list cannot be used for vehicles manufactured for other markets. For such vehicles, please refer to Infosheet 1.67.

Note: Class MA Honda vehicles not listed below that were manufactured for the Japanese domestic market and first registered in Japan after 1/1/1996 will comply with an approved frontal impact standard. A Honda vehicle that was manufactured for the Japanese Domestic market can be distinguished by the presence of a Japanese chassis number consisting of a 3-character model code and 7-digit sequential build number. Vehicles with 17 digit Vehicle Identification Numbers (VINs) were not manufactured for the Japanese domestic market.

Disclaimer - All reasonable efforts have been taken to ensure this information is accurate. However, the information is not legal advice, may contain information provided by other information providers, and may be changed, deleted, added to or otherwise amended without notice. Nor does Land Transport New Zealand endorse or guarantee any other organisations or persons linked or referred to, or the accuracy of their information. Before acting on the information contained (or linked or referred to) in this document you should take specific advice from qualified professional people. Land Transport New Zealand does not accept any responsibility or liability whatsoever whether in contract, tort, equity or otherwise for any action taken as a result of reading, or reliance placed on Land Transport New Zealand because of having read, any part, or all, of the information, or for any error, inadequacy, deficiency, flaw in or omission from that information. You ignore this disclaimer at your own risk.

Last updated: 23 May 2003