Land Transport NZ is now
part of the NZ Transport Agency
www.nzta.govt.nz
Accessibility | Help | Site index | Contact us
Factsheet 66 – July 2009
This factsheet provides information on approved driver licensing courses for all licence classes and licence endorsements.
If you're under 25 years old, you can reduce the minimum time you have to spend on a restricted licence from 18 months to 12 months by completing an approved advanced driving skills course. If you’re over 25, the minimum time can be reduced from six months to three months.
In addition to completing the approved advanced driving skills course, you'll still be required to pass the full licence test (practical test) to obtain a full licence.
For details on the full licence test, see:
There are two approved advanced driving skills courses:
If you're under 25, you should remember that to get a time reduction you need to have held your restricted licence for at least six months before you do the course.
You can also get information about courses and course providers by:
If you want to drive heavy vehicles, you have to obtain the appropriate learner licence (class 2, 3, 4 or 5) before driving. The licence class you need to obtain depends on the weight of the vehicle you want to drive. When you apply for the learner licence you may also need to provide a medical certificate (see Factsheet 70, Heavy vehicle driver licences).
To progress to a full licence, you've got two options:
The approved courses for heavy vehicle classes are aligned with unit standards on the New Zealand Qualifications Authority (NZQA) framework. If you successfully complete a course, you have the opportunity to have the unit standard you've achieved count towards a national certificate as well as a driver licence.
The relevant course unit standards are:
| Course | Unit standards |
|---|---|
| Class 2 | 17574 (Class 2) and 24089* (fatigue management, work time and logbooks) |
| Class 3 | 17575 (Class 3) and 24089* |
| Class 4 | 17576 (Class 4) and 24089* |
| Class 5 | 17577 (Class 5) and 24089* |
* Required unless successfully completed with an approved driver licensing course provider either:
You can view these unit standards on the NZQA website.
The approved courses for licence endorsements are aligned with unit standards on the New Zealand Qualifications Authority (NZQA) framework. If you successfully complete a course, you have the opportunity to have the unit standards you've achieved count towards a national certificate as well as a driver licence.
Successfully completing the course is only one requirement in obtaining the endorsement on your driver licence. Please refer to the relevant factsheet (shown in the table below) for details about the full requirements for each endorsement type.
| Endorsement type | Course unit standards | Factsheet |
|---|---|---|
| Passenger ('P') | 17579 and 24089* | 42 |
| Vehicle recovery ('V') | 17580 and 24089* | 46 |
| Dangerous goods ('D') | 16718 | 37 |
| Forklift ('F') | 18496 | 10 |
| Rollers ('R') | 16702 | 40 |
| Tracks ('T') | 16703 | 40 |
| Wheels ('W') | 16701 | 40 |
| Driving instructor ('I') | 16646, 16647, 14511, 14521, 14523, 20179, 20180, 3466 | 5 |
* Required unless successfully completed within the previous 12 months with an approved driver licensing course provider.
You can view these unit standards on the NZQA website.
To find details of course providers for classes 2-5 and licence endorsements:
If you're interested in providing approved driver licensing courses for licence classes or endorsements, you must be a registered assessor with the appropriate industry training organisation (see below) for the relevant course unit standards.
For all course types (except tracks, wheels, or rollers), contact:
For tracks, wheels, and rollers endorsement courses, contact:
In addition to becoming a registered assessor:
Where you can find out more